Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV

incl. 2x AAA batteries

Tracks the voltage.

£106.03 Topseller

included VAT | plus shipping costs

Battery | Voltage V AC min – max [Order-No.]

Wish list

Order number: 45217

Increases your flexibility

Covers the relevant voltage range for the work of an electrician.

Simplifies your work

Large LCD display with background illumination, LED scale and signal sound for easy to read measurement results.

Simplifies your work

An integrated flashlight function ensures optimal illumination.

Meets your requirements

Checking the FI trigger by means of two load buttons.

Close menu

Product description: Safety rule: determine zero voltage! The voltage and continuity tester from Wiha is your ideal daily companion to easily check this prerequisite of the safety rule and to support you with the various requirements in your daily work. It allows voltage testing of an extensive range from 0.5 V to 1,000 V AC or 1,500 V DC. In addition, the voltage tester can be used for continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection. Plus, resistance measurements and frequency measurements can also be conducted. Thanks to a large digital LCD display with background illumination and an LED display, the measurement results are immediately readable. An additional signal sound indicates the current flow during the continuity check. The check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. In addition, the voltage tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load. According to the measurement categories CAT III up to 1000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for working on building installation and directly on the sources of low-voltage installations.
Dimensions: 240 x 75 x 30 mm
Standards: IEC 61243-3:2014, IP64, CE CAT III 1.000V / CAT IV 600V
Application: To determine zero voltage. For standardized voltage testing, continuity testing, rotational field testing and resistance testing incl. FI protective switch measurement.

Available downloads:

BA_SB25517_Voltage_and_continuity_tester_05-1000_V-AC_CAT-IV_300x105mm_45217_INT_online.pdf

Close menu

	Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Order-No.	45217
EAN	4010995452179
Battery	2x AAA batteries
Voltage V AC min – max	0,5 - 1000
Voltage V DC min – max	0,5 - 1500
Contamination level	2
Remote voltage test	Yes
ATEX approval	No
Photovoltaic-compatible	Yes
eMobility-compatible	No
Integrated flashlight	Yes
FI check	Yes
Display	LED and LCD displays
Protection class	IP 64
Rotation field indication	LED L, R
Continuity check	LED and acoustic tone
Operating temperature	-15°C - 50°C
Storage temperature	-20°C - 60°C
Height above sea level	2000m
Single-pole phase test	100 - 1,00 V AC (40 - 70 Hz)
Rotation field test	170 - 7,000 V phase to phase AC 40-70 Hz
Permeability test	Measuring range 0 - 500 kΩ + 50%
LED ELV display	> 50 V AC, > 120 V DC
LCD range	0,5 V to 1000 V AC, 0,5 V to 1500 V DC
LCD resolution	0,1 V (< 10 V) and 1 V (> 10 V)
LCD precision	+/- 3%, +/- 3 digits (< 10 V) and +/- 3%, +/- 5 digits (> 10 V)
LCD overflow display	OL
Inherent time	< 0,5s LED and < 1s LCD
Safety circuit	< 3,5 mA (at 1,000 V)
Measuring mode	30 s ON (operation time), 240 s OFF (recovery time)
Battery consumption	about 80 mA
Humidity	max 85 % RH
Acoustic signal	Yes
Overall length (mm)	282
Gross / Net	£106.03 / £89.10